PLAIN

PLAIN letters have no installation hardware.

PAD

PADS are plastic disks on the rear of the letters. Secure the letters to the wall with silicone adhesive (see accessories). Adjustable or flush pads available upon request.

STUD

STUDS are metal threaded posts on the rear of the letters. Specify stud lengths of 1, 2, 3, 4, 5, or 6 inches. Specify if studs need to be in line for brick or block wall mortar joints.

COMBINATION

COMBINATIONS have pads at the bottom and pad/stud combinations at the top of the letter. Specify if studs need to be in line for brick or block wall mortar joints. Not for letters under 6 inches.

COMBINATION ALL

COMBINATION ALL have stud though pads on all mounts. Specify if studs need to be in line for brick or block wall mortar joints. Not for letters under 6 inches.

OUTSIDE BRKT.

INSIDE BRKT.

BRACKETS are L-shaped plastic projections flared outward from the back of the letter. For brackets flared inward or for letters over 18 inches, brackets will be shipped unattached.

WIRE

WIRES are stainless steel hooks inserted into plastic blocks glued to the inside of the letter. Available for flush mounting or with 1/2, 1, 1-1/2, or 2 inch standoffs.

FOAM FILLED

FOAM FILLED letters are filled with rigid urethane foam and cut flush to the back edge of the letter. Available for letters 9 inches and smaller.

FREE STANDING

FREE STANDING letters have 90 degree mounting brackets for installing on roofs. Other angles available upon request. Price is 3 times plain letter.